I've spent a lot of time writing CLI tools written in NodeJS (nodemon, snyk, inliner and more) and packages that have to work in multiple versions of node, and thus different support for JavaScript.

In general, I've stuck to "vanilla" ES5 JavaScript, no fancy arrow functions, or default parameters or niceties like includes. However, in the last year and support has been landing all over the place, I've slowly enjoyed using this sugar. More importantly pretty much all of ES6 is available in Node 6 - so now I've been looking at how I can use Babel to support ES6 without affecting my build times.

READER DISCOUNTSave $50 on terminal.training

I've published 38 videos for new developers, designers, UX, UI, product owners and anyone who needs to conquer the command line today.

TL,DR; because my post is a bit long!

I develop in the latest version of node, and run my local tests with the newest version (ideally not requiring any transpiling).

In the package.json, I have:

"scripts": {
  "travis-coverage": "node_modules/tap/node_modules/.bin/nyc report --reporter=text-lcov | node_modules/tap/node_modules/.bin/coveralls",
  "coverage": "tap --cov --coverage-report=lcov test/*.test.js",
  "tapone": "COVERALLS_REPO_TOKEN=0 tap --nyc-arg=--require --nyc-arg=babel-polyfill --timeout=60 --cov --coverage-report=text-summary",
  "test": "npm run tapone test/*.test.js",
  "test:babel": "babel test/*.test.js -d . && npm test",
},

And the .travis.yml contains:

matrix:
  include:
    - node_js: "6"
    - node_js: "4"
    - node_js: "0.10"
      env: BABEL=true
script: "[[ $BABEL == true ]] && npm run test:babel || npm test"
after_success:
  - npm run travis-coverage

Note that as I increase my use of ES6 features, the BABEL env value will likely also be included in the node4 tests.

Caveats and prerequisites

My caveat: sorry I was late to the party. I've never been keen on transpilers or processors. I remember watching an episode of 203 with Paul and Jake, where Paul said he was "sort of anti-transpiler". The real insight for me when is when he mention that the code that Babel generates is readable and close (if not the same) as what we would produce without it.

This, as the title suggests, was only for tests. Distribution code is slightly different and off topic for this post. This is also slightly bespoke to some of the set up I have, since Coveralls was the cause of some issues.

Finally, the most important factor for me was that this process would not affect my workflow. This means any intermediate step, and test time must not increase significantly.

Background and concepts

Believe me when I say: I tried a lot of combinations, but what I've settled on, I believe is pretty solid. However, if you're just after the solution, skip this bit 👍

For background, I use tap for my test strategy. Tap uses nyc for instrumenting code coverage. I'm also using Travis for CI and Coveralls captures a record of my coverage. These are important, because they're all at play.

Initial attempt: babel-node

My initial attempt at getting ES6 transpiling my scripts.test looked like this:

"scripts": {
  "test": "babel-node node_modules/.bin/tap test/*.test.js"
}

This, of course works offline, but inside of Travis, every run produced a spawn EACCES error:

Example of the Travis spawn access error

It took some time to realise that this was related to using Babel with the Coveralls module inside of tap which somehow blowing up.

So part of this task was to strip out the coverage task (by adding --no-cov) and move it out of the test and as part of the after_success event in Travis.

I also found that I could pass arguments to nyc to tell it to require in packages (specifically for require hooks that Babel provides).

Injecting babel into nyc

So now my command looks like this - and fair warning, it ain't pretty:

"scripts": {
  "coverage": "tap --nyc-arg=--require --nyc-arg=babel-polyfill --nyc-arg=--require --nyc-arg=babel-register --cov --coverage-report=lcov",
  "test": "tap --nyc-arg=--require --nyc-arg=babel-polyfill --nyc-arg=--require --nyc-arg=babel-register test/*.test.js --no-cov",
}

And my .travis.yml now has:

after_success:
  - npm run travis-coverage

Except now…my full test suite is running twice for each version of node in my test matrix (because the coverage re-runs tests). Not good.

The answer here is to generate the source coverage data for Coveralls during the test, but not post it during the test cycle (since this would cause the spawn EACCES error).

An important benefit of using after_success for coverage: I've found that Coveralls can be down (or sending error responses to the coverage post) which causes our entire test to fail. This is a good practise to isolate the coverage from the actual tests (in my case).

Hacking tap & smarter matrix

So now I need to hack tap…a little. Tap automatically posts to Coveralls if the COVERALLS_REPO_TOKEN env value is present (which it is in my Travis builds).

In the execution of tap, I'm going to zero out the Coveralls token, so the nyc output is still generated, but not posted. Then in the after_success I'll call npm run travis-coverage which directly pipes the nyc coverage to the local coveralls package:

"travis-coverage": "node_modules/tap/node_modules/.bin/nyc report --reporter=text-lcov | node_modules/tap/node_modules/.bin/coveralls"

Nearly there.

I also only want to make use of babel if we're running the node 0.10 tests. So my Travis build matrix needs some tweaking. Below, I'm adding an environment value to the node 0.10 run, and using that to work out what to run (instead of using npm test by default):

matrix:
  include:
    - node_js: "6"
    - node_js: "4"
    - node_js: "0.10"
      env: BABEL=true
script: "[[ $BABEL == true ]] && npm run test:babel || npm test"

With this, I call npm test for "capable" environments, and npm run test:babel for when I need babel to be included. The test:babel looked like this:

"test:babel": "COVERALLS_REPO_TOKEN=0 tap --nyc-arg=--require --nyc-arg=babel-register,babel-polyfill --timeout=60 --cov --coverage-report=text-summary test/*.test.js"

…except, yeah, notice the issue?

Slowwwww tests

That's node 0.10 taking a whopping 10 minutes to complete the tests. No, thank you, sir.

Reducing test time

The issue is that since tap spawns a new process per test file (which is great), it also means babel has to do all it's work over and over.

The answer is to, within the Travis build, completely rewrite the test scripts using babel's transpiler, and only then are the tests run. Sort of gnarly, but it means the execution time for the babel based test is the same as the non-babel tests.

Now, the test:babel looks like this:

"test:babel": "babel test/*.test.js -d . && npm test"

Now, finally, the workflow is good. I code with the goodness of ES6 and beyond, I'm finally in camp-babel and there's no extra waiting time on my tests.

Final set up

The final set up and configuration looks like this:

"scripts": {
  "travis-coverage": "node_modules/tap/node_modules/.bin/nyc report --reporter=text-lcov | node_modules/tap/node_modules/.bin/coveralls",
  "coverage": "tap --cov --coverage-report=lcov test/*.test.js",
  "tapone": "COVERALLS_REPO_TOKEN=0 tap --nyc-arg=--require --nyc-arg=babel-polyfill --timeout=60 --cov --coverage-report=text-summary",
  "test": "npm run tapone test/*.test.js",
  "test:babel": "babel test/*.test.js -d . && npm test"
},
"devDependencies": {
  "babel-cli": "^6.7.7",
  "babel-polyfill": "^6.7.4",
  "babel-preset-es2015": "^6.6.0",
  "babel-preset-stage-3": "^6.5.0",
  "tap": "^5.7.1"
}

I use both npm test for a complete test run. And npm run tapone test/foo.test.js to test a single test script, which also gives me the babel-polyfill package and only adds a negligible amount of time. Finally, the .travis.yml contains:

matrix:
  include:
    - node_js: "6"
    - node_js: "4"
    - node_js: "0.10"
      env: BABEL=true
script: "[[ $BABEL == true ]] && npm run test:babel || npm test"
after_success:
  - npm run travis-coverage

I hope this is useful to someone out there (even if it's just me in another 5 years time)!